StewMac 2-Way Adjustable Hot Rod Truss Rod, 1/4" Hex Nut, 18" overall length

Our Hex Nut Hot Rod Truss Rod has 1/4" hex nut design for electric guitars and banjos. Smooth two-way action corrects upbow and backbow, giving complete control over the neck.Easy to install. The Hot Rod® fits in a straight channel. For proper operation, this truss rod must be installed so that the active rod (the rod with the adjustment nut) is below the passive rod. A wooden filler stick is not required.Our Hot Rod neck adjustment system features twin rods in threaded brass collars. The stainless steel active rod turns for smooth neck alignment, with 2-way action. The Hot Rod requires an access cavity for the adjustment nut, and a straight 7/32"-wide x 7/16"-deep slot (measured from the bottom of the fretboard) for installation.The 18" rod fits many electric guitars and banjos. Overall length includes the nut.Installation and adjustment instructions included.

• Smooth two-way action (adjusted via 1/4" hex nut) corrects upbow and backbow, giving complete control over the neck
• For proper operation, this truss rod must be installed so that the active rod (the rod with the adjustment nut) is below the passive rod
• Requires an access cavity for the adjustment nut, and a straight 7/32"-wide x 7/16"-deep slot (measured from the bottom of the fretboard) for installation
• Fits many electric guitars and banjos
• Overall length is 18", which includes the nut